Rebuild Program Product Upgrades

 

You deserve what you want on your home!

All products listed on this page have been reviewed and approved by Rebuild NWF as upgrade products for use on your home. Additionally, the materials are Florida Product Approved that comply with the Florida Building Code requirements for hurricane wind and impact resistance.

Egress/Entry Doors
Item
Description
Upgrade Cost

6 panel door

Click to enlarge

Rebuild's standard hollow metal, six panel, wind and impact rated entry door. Unit comes with new wood frame, threshold and exterior trim. Your existing interior trim, lock set and dead bolt will be reused.
N/A

2 panel 9 lite door

Click to enlarge

Upgrade from Rebuild's standard 6 panel door. This is a fiberglass clad door with an insulated, impact resistant, clear half-lite glass kit with an internal 9 lite grid. The lower portion of the door comes with a two panel design. Unit comes with new wood frame, threshold and exterior trim. Your existing interior trim, lock set and dead bolt will be reused.
$680.00

2 panel half lite door

Click to enlarge

Upgrade from Rebuild's standard 6 panel door. This is a fiberglass clad door with an insulated, impact resistant, clear half-lite glass kit. The lower portion of the door comes with a two panel design. Unit comes with new wood frame, threshold and exterior trim. Your existing interior trim, lock set and dead bolt will be reused.
$650.00

Full glass 15 lite

Click to enlarge

Upgrade from Rebuild's standard 6 panel door. This is a fiberglass clad door with an insulated, impact resistant, clear full glass kit with an internal 15 lite grid. Unit comes with new frame, threshold and exterior trim. Your existing interior trim, lock set and dead bolt will be reused.
$830.00

Full glass door

Click to enlarge

Upgrade from Rebuild's standard 6 panel door. This is a fiberglass clad door with an insulated, impact resistant, clear full glass kit. Unit comes with new wood frame, threshold and exterior trim. Your existing interior trim, lock set and dead bolt will be reused.
$800.00

6 Panel Fiberglass Door

Click to enlarge

Upgrade from Rebuild's standard 6 panel door. This is a fiberglass clad, insulated, six panel, wind and impact rated entry door. Unit comes with new composite frame, threshold and exterior trim. Your existing interior trim, lock set and dead bolt will be reused.
$270.00
Upgrade from standard wood frame to composite, rotten resistant frame.
Add $60.00
All door prices listed above are for inswing doors, an upcharge is required for outswing doors,
Add $25.00
For non-standard height door units that must be cut down to fit your existing opening and extra charge is required for this work.
Add $70.00
For door frames that are 6-9/16" wide in lieu of the standard 4-9/16" wide, an upcharge for the wider door jamb is required.
Add $40.00
For door frames with widths other than 4-9/16" or 6-9/16" wide an upcharge is required.
Add $60.00
An upcharge will be required for stainless steel in lieu of standard finish hinges.
Add $50.00
To change a door opening scheduled on your confirmed bid to receive shutter panels to a standard six-panel steel door unit..
Add $200.00
     
NOTE: The photos of the doors shown above are representative of the door units that will be installed on your home but may not match the door that will be installed in every detail. These photos are included for informational purposes only in order to convey the general idea of what you are purchasing.
     
Item
Description
Upgrade Cost
Window Protection

Standard Shutters

Click to enlarge

Rebuild's standard hurricane shutter panel. The panel is 24 gauge galvanized steel, approximately 12" wide by variable lengths which can be install vertically or horizontally, with or without mounting track depending on the job conditions. Your initial estimate will be priced the most economically way possible. From that configuration you will be able to upgrade the installation on your home with various accessories or even totally different materials listed below.
N/A

Clear lexan

Click to enlarge

These panels are clear polycarbonate ("Lexan"). The configuration of these panels match the standard steel hurricane panel shown above. These panels are interchangeable with the galvanized steel panels. This means that you can choose to install one "lexan" panel in the mix with your steel panels or cover entire openings with the panels to allow you to see out and for light to enter your home. Many customers choose to install these over their gable vents and leave them up year-round.
$9.55/sf

F Track

Click to enlarge

Bottom 'F' or angle track is installed at the bottom of doors, and often on windows, to secure vertically installed shutter panels over the openings. If not required for the standard Rebuild program work, you may choose to have it installed as an upgrade.
$7.25/lf

H Track

Click to enlarge

Top 'h' or 'U' track is often installed at the top of doors and windows to secure vertically installed shutter panels over the openings. If not required for the standard Rebuild program work, you may choose to have it installed as an upgrade.
$7.25/lf

PanelMate

Click to enlarge

PanelMate® fasteners offer one-time installation – the anchors stay in place, ready for even faster and easier panel mounting as the next storm approaches. These fasteners receive a special coating to provide exceptional protection against corrosion. The length of the PanelMates vary depending on the composition of your exterior wall. The fasteners will be long enough to extend through the finish material and anchor into the studs of a wood framed house or into the core of the block for masonry homes.
N/A

Stainless Steell PanelMate

Click to enlarge

We offer stainless steel PanelMates as an upgrade option to the standard PanelMates for use in highly corrosive environments, such as on the beach or bays.
$2,00/ea

 Female_PanelMate

Click to enlarge

Female PanelMates are an option for some stucco, wood siding and vinyl siding homes. Brick veneer, some stucco and stone veneer homes are not good candidates for female PanelMates. Brick and stone veneer have a tendency to break because of the size hole required for countersinking this fastener.
$4.00/ea

Stainless Steel PanelMates

Click to enlarge

Stainless steel female PanelMates are available for use in lieu of the standard PanelMates in highly corrosive environments. However, the same precautions mention above for female PanelMates apply to the stainless steel version of the fastener.
$5.00/ea

Fabric-Shield

Click to enlarge

Wayne-Dalton Fabric-Shield™ Storm Panels are a highly-effective alternative to steel or aluminum hurricane panels. These PVC coated woven fabric panels are tested to block wind, rain and storm-driven projectiles. Yet Fabric-Shield panels are easy to handle and allow light to enter.
$2.20/sf

Accordion Shutter

Click to enlarge

Accordion shutters are permanently installed on the house so they are ready for use at any time. This shutter is economical, durable and easy to use. Because these shutters can be opened and closed from inside your home they are an excellent choice for second floor openings and for use on egress doors that you want to change out for one of the standard or upgraded door options. Accordion Shutters are available in white, bronze, beige and ivory.
$23.00/sf
 
 

Garage
Doors

INSULATED GARAGE DOOR UPGRADE OPTIONS

Size

MODEL 8100 (R 3.7)
Basic

MODEL 8300 (R11)
Highest

8x7

$150.00

$300.00

9x7

$150.00

$300.00

16x7

$300.00

$750.00

18x7

Special Quote Req'd

Special Quote Req'd

8x8

Special Quote Req'd

Special Quote Req'd

9x8

Special Quote Req'd

Special Quote Req'd

16x8

Special Quote Req'd

Special Quote Req'd

18x8

Special Quote Req'd

Special Quote Req'd

OTHER UPGRADES

Impact Glass

$300.00 – 8’ & 9’ Doors
$600.00 – 16’ & 18’ Doors

NOT AVAILABLE

Garage Door Opener

$300.00 when installing door (includes 1 remote)
$350.00 when called back to install opener
$45.00 each additional remote control

Revised 02/01/2015